MOTOKIYAS.

Motorcycles › Compare

BMW S 1000 RR vs Suzuki DR-Z4S

ESTIMATED SIMULATION

Run the comparison →

The BMW S 1000 RR (2025) and the Suzuki DR-Z4S (2025) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The BMW S 1000 RR is a sport bike with 999 cc, 206.5 hp and 198 kg; the Suzuki DR-Z4S is a enduro bike with 398 cc, unlisted power and 151 kg. Power-to-weight with the rider: 756.5 hp/ton versus no data.

In the simulation the BMW S 1000 RR covers 0-100 km/h (speedometer) in 2.84 s and the Suzuki DR-Z4S in 4.98 s; the BMW S 1000 RR is quicker by 2.15 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 36.4 m for the BMW S 1000 RR (with ABS) and 46.8 m for the Suzuki DR-Z4S (with ABS). The BMW S 1000 RR stops 10.4 m shorter. Calculated top speed: 287 km/h (manufacturer claim) versus 145 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for the BMW S 1000 RR and class-average calibration (no accepted model-specific road test) for the Suzuki DR-Z4S. Missing manufacturer data (power, torque) is estimated by class regression, not measured. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationBMW S 1000 RRSuzuki DR-Z4S
Classsport bikeenduro bike
Engine999 cc398 cc
Power206.5 hpno data
Wet weight198 kg151 kg
Power-to-weight (75 kg rider)756.5 hp/tonno data
0-100 km/h (speedometer)2.84 s4.98 s
100-0 km/h braking distance36.4 m46.8 m
Top speed (calc.)287 km/h145 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons