MOTOKIYAS.

Motorcycles › Compare

Honda Forza 250 vs Honda NT1100

ESTIMATED SIMULATION

Run the comparison →

The Honda Forza 250 (2026) and the Honda NT1100 (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Honda Forza 250 is a scooter with 249 cc, 22.8 hp and 186 kg; the Honda NT1100 is a touring bike with 1,084 cc, 100.6 hp and 249 kg. Power-to-weight with the rider: 87.4 hp/ton versus 310.4 hp/ton. On this measure the Honda NT1100 is 255% ahead.

In the simulation the Honda Forza 250 covers 0-100 km/h (speedometer) in 10.05 s and the Honda NT1100 in 3.15 s; the Honda NT1100 is quicker by 6.90 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 45.2 m for the Honda Forza 250 (with ABS) and 41.0 m for the Honda NT1100 (with ABS). The Honda NT1100 stops 4.2 m shorter. Calculated top speed: 124 km/h (GPS measurement) versus 194 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationHonda Forza 250Honda NT1100
Classscootertouring bike
Engine249 cc1,084 cc
Power22.8 hp100.6 hp
Wet weight186 kg249 kg
Power-to-weight (75 kg rider)87.4 hp/ton310.4 hp/ton
0-100 km/h (speedometer)10.05 s3.15 s
100-0 km/h braking distance45.2 m41.0 m
Top speed (calc.)124 km/h194 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons