MOTOKIYAS.

Motorcycles › Compare

CFMoto 250SR vs Honda NT1100

ESTIMATED SIMULATION

Run the comparison →

The CFMoto 250SR (2026) and the Honda NT1100 (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The CFMoto 250SR is a sport bike with 249 cc, 26.2 hp and unlisted weight; the Honda NT1100 is a touring bike with 1,084 cc, 100.6 hp and 249 kg. Power-to-weight with the rider: 105.1 hp/ton versus 310.4 hp/ton. On this measure the Honda NT1100 is 195% ahead.

In the simulation the CFMoto 250SR covers 0-100 km/h (speedometer) in 8.38 s and the Honda NT1100 in 3.15 s; the Honda NT1100 is quicker by 5.23 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 36.4 m for the CFMoto 250SR (with ABS) and 41.0 m for the Honda NT1100 (with ABS). The CFMoto 250SR stops 4.6 m shorter. Calculated top speed: 142 km/h (estimated from power and drag) versus 194 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationCFMoto 250SRHonda NT1100
Classsport biketouring bike
Engine249 cc1,084 cc
Power26.2 hp100.6 hp
Wet weightno data249 kg
Power-to-weight (75 kg rider)105.1 hp/ton310.4 hp/ton
0-100 km/h (speedometer)8.38 s3.15 s
100-0 km/h braking distance36.4 m41.0 m
Top speed (calc.)142 km/h194 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons